N2O Wastewater Operator Console 3.0
The N2O Wastewater Operator Console connects your sensors and handles your measurement data continuously. You can monitor N2O emissions in real time and access measurement values, sensor status, and calibration data on the console.
Measurement data is logged on the console and can be transferred directly to your PLC or SCADA system using standard communication protocols. This allows you to use your N2O data in your existing setup without additional programming or complexity. Read more...
Manage your N2O measurements
The Operator Console gives you access to live data, historical data, and sensor information in one place. You can follow measurement trends and check calibration status and sensor condition directly from the interface.
Data is logged continuously. You can export it for further analysis or use the data directly in your control system.
Connect directly to your control system
The console integrates with your PLC or SCADA system using standard outputs, 4–20 mA and Modbus TCP IP. This makes it straightforward to include N2O data in your existing monitoring and control setup.
Flexible installation across your plant
The N2O Wastewater System is not limited by cable length between the Operator Console and Connector Units. This allows you to place and move sensors where they provide the most value in your process, even if you are running a large treatment plant with long distances between tanks.
Supports your full system setup
The Operator Console works together with the N2O Wastewater Sensor and Connector Units in the N2O Wastewater System. You can connect up to 16 sensors and manage them through one console.
Measure N2O directly in the liquid phase to optimize your wastewater treatment process and reduce your emissions.
Operate and calibrate your sensors where they are installed.
Collect and manage your N2O measurement data in one place.
Measure dissolved N2O with fast response time in the biological tanks of wastewater treatment plants
Collect data from up to two sensors and transmit directly to your PLC or SCADA system
A Clark-type electro-chemical sensor that measures the concentration of nitrous oxide
Calibrate your nitrous oxide sensor every second month
Free placement of your N2O Wastewater Controller
Robust sensor mounting for fast flowing water
Compare N2O Wastewater System generations
