N2O Wastewater Sensor 3.0
The N2O Wastewater Sensor delivers stable measurements across aerobic, anoxic, and anaerobic zones, so you can follow both where N2O is produced and where it is reduced. The sensor is built to handle the harsh wastewater conditions where foam, condensation and fouling are part of normal operation.
The fully digital sensor stores calibration and sensor-specific data on the sensor, so you can move it or replace the sensor head without losing setup or history. Your measurement data is collected and handled through the Operator Console, giving you direct N2O emission results without additional programming or calculations.
Every 2nd month you calibrate directly at the tank in minutes using LED guidance, without manual temperature measurement or using a screen. The sensor continuously monitors its own status and alerts you when calibration or sensor head replacement is needed. Read more...
Measure N2O directly in your process
Calibrate at the tank
Calibration is only needed every two months and can be completed in minutes. The quick calibration can be performed right next to the tank with just a bucket with 4 l tap water and the N2O Calibration Kit.
The sensor has a built-in temperature sensor so you just need to follow the LED guidance from the N2O Wastewater Connector Unit.
Smart sensor operation
The sensor continuously monitors its own status and alerts you when you should calibrate or exchange the N2O Wastewater Sensor Head. This helps you stay on top of maintenance without manual checks and ensure continuous measurements.
Calibration and sensor-specific data are stored directly on the sensor, so you keep calibration, history and setup when moving the sensors or replacing sensor heads. Measurement data is handled through the N2O Wastewater Operator Console, where you get direct N2O emission results without additional programming or calculations.
Part of a flexible monitoring system
The N2O Wastewater Sensor works as part of a complete system with the Operator Console and Connector Units. You can connect up to 16 sensors to one system and integrate data directly with your PLC or SCADA without adding complexity, subscriptions, or mandatory cloud platforms.
Learn more about the N2O Wastewater System components:
Measure N2O directly in the liquid phase to optimize your wastewater treatment process and reduce your emissions.
Operate and calibrate your sensors where they are installed.
Collect and manage your N2O measurement data in one place.
Measure dissolved N2O with fast response time in the biological tanks of wastewater treatment plants
Collect data from up to two sensors and transmit directly to your PLC or SCADA system
A Clark-type electro-chemical sensor that measures the concentration of nitrous oxide
Calibrate your nitrous oxide sensor every second month
Free placement of your N2O Wastewater Controller
Robust sensor mounting for fast flowing water
Compare N2O Wastewater System generations
